What are you looking for?

+90 532 651 08 79 +90 532 651 08 79 +90 507 215 66 82 +90 507 215 66 82 +90 507 215 66 82 +90 507 215 66 82

Battery Powered Floor Scrubber B4501

Popular Product

Battery Powered Floor Scrubber B4501

  • Category: Floor Scrubbers

It does not clean the dirt by spreading it on the surface like a mat. It provides effective cleaning by vacuuming the dirty water on the floor during brushing.
It can be used on all floors such as marble, tile stone, granite, epoxy. It does not damage the floor.
75 lt. With it, an area of 2200 m⊃2; is cleaned per hour.
The amount of water can be adjusted according to the soiling rate of the floor.
It does not require the use of special chemicals for floor cleaning, it is sufficient to use non-foaming surface cleaner chemicals.
The amount of chemical use is very small, equal to 1/10 of the amount of chemicals used in mop cleaning.
It provides convenience with its wireless use. It can be used for 3-4 hours with a single charge.
It is used in schools, factories, shopping malls, hotels and markets.
It is always ready for service with its wireless ease of use.
Enjoy comfortable cleaning with its silent use.
It provides 2.5-3 hours of uninterrupted cleaning with a single charge.
It is produced with maintenance-free gel battery technology.
Domestic production, extensive service network, affordable spare parts

Technicial Specifications

Brush Engine: 24 / 450 (Volt / Watt)
   
Vacuum Engine: 24/600 (Volt/Watt)
   
Clean / Dirty Water Tank: 38/42 L
   
Brush Piece / Diameter:  1/42cm
   
Brush Cycle: 170 RPM
   
Cleaning Width : 800mm
   
Max. Performance: 2000 m2/hour
   
Battery Capacity : 24/200 (V/Ah)
 
   
 

General features

The usage areas of floor scrubbers are as follows;
Laminate and wood materials can be used on all floor types except tiled floors. The main reason why it cannot be used on laminate floors is that it does wet cleaning. Laminate floors are not suitable for use as they have an inflatable structure when they absorb water. Except those; It is suitable for use on concrete floors, marble floors, granite floors, ceramic and tile floors.

About Product

B4501 floor scrubber, one of the gel battery-powered floor cleaning machines, polishes all floors with the power it receives from the battery. With a brush diameter of 42cm and a rotation speed of 170 RPM, it removes any stuck dirt and residue on the floor. Although it is battery-powered, it creates problems in prejudices, but when the working performance of the machine is experienced, it is seen that it gives the same power and performance as the electric cable models. With 38 liters of clean water and 42 liters of dirty water tank, it removes dirt and dust adhering to the floor and prevents it from spreading by taking it into the dirty water tank. With the rear suction apparatus of 80 cm length, the water and dirt accumulated on the floor are collected. B4501 is an optimum machine compared to other models. This not only ensures the most accurate performance and the most accurate cleaning, but also means that all companies can easily reach it economically. Floor scrubber are generally distinguished from each other by their cleaning capacity and tank capacities. One of the floor cleaning machines, B4501 is more powerful than other similar floor scrubber on the market. Due to its domestic production, it has many advantages such as easy access to spare parts and wide service opportunities. Customizations can be made upon your request, as well as machines designed for higher or lower square meters, from the similar products section below.

Effective Factors on Battery Powered Floor Scrubber Prices
Battery-powered floor washing and vacuuming machines, which are called by many names such as battery-powered floor cleaning robot, battery-powered floor scrubber, battery-powered floor cleaning machine, battery-powered floor washing machine, are industrial type cleaning machines that are becoming more common day by day.
Used floor scrubbers have become more sought after with increasing awareness of use. Cleanvac cleaning machines, with the domestic production floor washing robot it has made in Turkey, has brought this technology to numbers that businesses in all income groups can reach.
Cordless floor washing machines prices are higher than electric floor washing machines. The reason for this is that the brush and vacuum motors used in cordless cleaning cars are special motors produced as 24 volts. Batteries and chargers also significantly affect this cost.
Battery-powered floor washing robots are quieter and more practical to use. Because the hassle of cables and sockets has come to an end in this class of floor washing machines. Cleanvac floor cleaning machines are suitable for use on almost all types of floors.
Affordable battery powered floor washing machines have been serving the users for many years, both in Turkey and in the world.
One phone call is enough for the services we can offer to you, regardless of brand, for your spare parts needs regarding floor washing machine brush, floor washing machine pad, battery powered cleaning robots. We are trying to help you with our representatives who are experts in their fields, trained and have field experience.

Operating instructions

Take the brush (diameter 43 cm) that we have supplied with the machine.
Have another person lift ten of the machine by pressing down on the handle with both hands.
Bring the brush in your hand to the bearing in front of the motor. Make sure that the brush is attached by approaching it parallel to the gaps in the brush and turning the brush to the left.
Then lower the front of the vending machine to the ground.
Open the lid of the blue clean water tank and add enough water and detergent.
As a detergent, you should definitely prefer detergents and shampoos that do not foam.
Charge your machine before starting to work. Press the pedal at the bottom right behind the machine with your right foot and push it to the right.
The pedal will go up. In this way, ensure that the brush descends (touches the ground).
Open the water valve located at the bottom left of the back of the machine according to the pollution and type of the ground.
Start the brush by pressing the brush motor button on the machine (on the panel) and take the machine to the place where you will wash it.
Wash it this way.
When you want to do both washing and vacuuming, while the washing process is being performed, pull the apparatus lifting lever located in the upper middle of the back of the machine down from its place and make the apparatus go down and press the vacuum motor button. In this way, while washing, vacuuming is done at the same time.
When you are finished cleaning, turn off the water valve and absorb the remaining water on the floor. Then turn off the vacuum motor switch (red button).
Turn off the brush motor switch (green button) when the brush is in the down position (on the ground).
Press down on the brush lift pedal with your left foot so that the brush stays in the up position (in the air).
Then park the machine in a place where it will not be damaged or damaged.

User Comments

Since floor cleaning is very important in my factory, we searched for machinery. Since standard vacuum cleaners or household floor cleaning machines would not work, we even considered bringing them from abroad. After a short research, we came across the Cleanvac brand, which made us feel very comfortable. It has good performance in cleaning the production area. Those looking for a floor cleaning machine should take a look.
Zeynel Harun
We are a wedding venue operator. Wiping the floors with a mop was an unreasonable task. It only takes an employee's hours and spends almost half of the cleaning job mopping the floor. While looking for a solution, we came across floor scrubbers. When I made a demo, I complained to myself "why didn't I buy it before?" and stopped. Karteknik Makina employees were also very knowledgeable. Together we found the right machine. I am satisfied.
Mahir Dündar
As the purchasing manager of Optimum AVM, we would like to thank Kartek Makina for their special interest and relevance on behalf of my business. Floor cleaning vending machines used all possibilities as a guide in our research. The wide service network was the biggest factor that made our job easier. We understand that we made the right decision by choosing.
Optimum AVM
Due to the central location of our hospital, we accelerated the cleaning duties especially during the pandemic period. We stepped in to buy more advanced machines. The way we came out of our market research and the knowledge we gained was Cleanvac. The electric vehicle we currently prefer for in-hospital transportation was again the Cleanvac brand. It has become a brand that meets our needs in every respect.
Atatürk Eğitim ve Araştırma Hastanesi
Concrete floors are easy to wash but very difficult to dry. Since we knew this, we wanted a special machine. After finding the type of machine suitable for the hard floor, the main problem would be the spare part. I understood that we were in the right place during our meetings with Kartek Makina officials. We made a demo immediately. We saw the power and capacity of the machine. After the demo, I left the machine as it was and sent the authorities. He benefited from the first minute. Every factory needs this.
Tisan A.Ş
We are one of the largest modified garages in Turkey. As long as cars and accessories stay clean, they look beautiful and you are preferred. Tire tracks create a very bad image due to vehicle entry and exit. It is easy to wipe it with a mop, but it does not dry quickly, which hinders our work or our customers slip and fall while walking around the garage. We used to run a fan even in winter, since the best way to prevent this is to dry quickly. Fortunately, Kartek Makina offered us a small but effective floor scrubber that would solve our problem.
Tisan A.Ş

FAQ

What is the Working Logic of the Floor Scrubber?
Floor scrubbers aim to minimize the wetness by washing, brushing and vacuuming the floor as a general operating logic. These machines are available in various power options. It has been specially designed according to the square meter of the area you will use. Brushes wash and dry large areas easily without user fatigue.
What is the Minimum Square Meter that the Floor Cleaning Machine Can Work?
Floor scrubbers are suitable for cleaning a minimum area of 50 m2. It is not possible to use it in smaller areas as it will force the user. The maximum area cleaning can be up to 10,000 m2. This situation may vary depending on the performance and area cleaning power of the machine to be preferred.
Can Floor Scrubber Be Used On Any Floor?
The floor scrubbers can be used on all hard floors, except wooden laminate flooring, as the water system washes and dries. Not recommended as water can damage laminate and wood floors.
What are the Types of Floor Scrubber?
Floor scrubbers are available in square meters and according to the structure of the enterprise, according to the brush diameter, tank liters and the width of the rear suction apparatus.
Is There a Battery Powered Version of the Floor Scrubber?
There are electric cable and battery-charged models of each model in floor scrubber. 
Can Floor Scrubber Be Used As Brooms?
No. Floor scrubbers are designed to wash the floor and draw the muddy dirty water from the floor. The purpose of the vacuum cleaners is to vacuum large parts. Large part vacuum is not possible in these machines due to design and purpose.
What is the Lifespan of Brush and Rear Wiper Apparatus in Floor Scrubber?
Brush ; If the ground friction is at a minimum level, it is 2 years on average, and if it is rough (like concrete), it is 1-1.5 years. We can evaluate the rear rubber wiper part under the same conditions and times.
What is the Warranty Period?
It is guaranteed for 2 years against manufacturing defects. The parts availability guarantee is 10 years.
Should I Prefer Electric Or Battery Powered Floor Scrubbers?
Both choices have pros and cons. If silence is important in the area you will use, if the electrical cable will cause problems in occupational safety, battery-powered preference will be more advantageous. If the machine will need to be used for more than 3 hours without interruption in the enterprise, the electric choice will be more accurate. When analyzed in terms of purchasing costs, battery-powered floor cleaning machines cost twice as much as electric ones.
What kind of machine should we choose for our factory?
If your square meter is up to 200 square meters, you can choose the battery or electric model from our floor scrubber with a capacity of 15 liters of dirty and 15 liters of clean water. 500 to 1000 m⊃2; If it is an area with a capacity of 35 liters of dirty water, you can choose one of our machines with a capacity of 35 liters of clean water, electric or battery powered. You can choose one of our electric or battery powered floor scrubbers with a capacity of 45 liters of clean and 45 liters of dirty water between 1000 and 2000 square meters. 2000 m⊃2; It is possible to choose one of our models, starting from 75 l and having a dirty and clean water capacity of up to 250 liters, by requesting the appropriate one with our sales representatives and field demos.
Are there any parts of floor scrubbers that are frequently worn and need to be changed?
In the case of using the appropriate accessories on the appropriate floor, using the appropriate pressure settings and choosing the appropriate detergent, the wear of the brush that performs the scrubbing operation and the rubber part that performs the suction operation will be delayed considerably. Parts in direct contact with the ground can wear out over time. Worn parts may need to be replaced.
Should I Use a Special Chemical in Floor Scrubbers or Can All Detergents Be Used?
As with all electrical devices, foam-controlled detergent should be used in this device. The detergent that will be used to dissolve the dirt stains on the floor in the field to be used should not be acidic or caustic. Foam, acidic detergents, detergents containing caustic will shorten the life of the materials with the wear feature of the machine by up to 90 percent.

Considerations

As stated in the electrical diagram of the floor cleaning machines, all engines and installations work in the range of 220-240 volts. In battery-powered models, this voltage value is 24 volts.

Do not use brushes and other cleaning parts without water. If it is used without water, friction will reach the highest level and the life of the parts will be shortened.

During the use of your machine, carefully clean the filters in the clean water tank and the dirty water tank at regular intervals.

When the dirty water tank is full, you should not neglect to empty it using the drain hose.

The dirty water tank usually needs to be emptied before it reaches the full level. Since this will cause dirty water to be drawn into the filter, you may cause a malfunction in your engine.

Foam-adjusted detergent and chemicals should be used. Otherwise, excess foam will pass through the filter and reach your engine and cause it to burn.

In the opening and closing process, you should do the brush motor while it is lowered to the ground. Otherwise, the brush may come out dangerously.

In case of malfunction or during maintenance, you should remove the plug from the socket. It is important for job security. In battery-powered models, you may need to remove the battery terminals.

Clean your floor cleaning machine after each operation. If you leave water in the water tank, dirty water and clean water may smell. It may emit an offensive odor in every operation.

Do not vacuum substances harmful to humans and the environment with the floor washing machine.

Do not unplug your floor cleaning machine before it is fully charged or unplug it while it is running unless necessary.

img

Web Special Campaign

Don't Miss Your Special Deals

Get Offer
Become Our Dealer