Ride-on Floor Scrubber Cleanvac B12001

Meet with the CLEANVAC B12001 Ride-on Floor Scrubber undertakes brushing and drying tasks, which is in the group of mounted floor cleaning machines. The ride-on floor scrubber, which is a result of the efforts of local engineers with high technology, works for 2-3 hours without interruption with the energy it receives from the high-capacity battery, washing, brushing and drying the floors of high square meters seriously. It is used in all floor types such as marble, tile, granite and epoxy in businesses such as schools, hospitals, public institutions and organizations, shopping centers. Since wet cleaning will be carried out, the rider model floor cleaning machine cannot undertake the task of cleaning wooden floors, considering the deformation.

Since CLEANVAC B12001 Ride-on Floor Scrubber does not have any structure that can damage the floor, its brush, which is very soft compared to the floor, allows the water and cleaning solution to be spread all over the floor and removed from its place, while it collects and absorbs the dirty water accumulated on the floor with its rear suction apparatus. In this way, enough moisture remains on the floor that can dry in minutes.

Ride-on floor scrubber shows the performance of cleaning a minimum area of 6000 m2 per hour. With the drive motor, it can move on its own on the ground and only needs to be directed with the help of the steering wheel. The CLEANVAC B12001 floor scrubber with rider, which is suitable for large square meters of businesses and businesses, has a very high tank capacity to meet the need. In this way, a full cleaning cycle can be performed without the need for a fill-empty operation. With a clean water tank capacity of 90 liters, you can clean 6000 m2 at once. Thus, you do not feel the need for constant reinforcement. Since the water flow rate can be determined according to the pollution rate of the ground, these rates are calculated according to the standard working environment and dirt level. Although the riding model floor washing machine does not require the use of an extra chemical in floor cleaning, its performance can be increased by adding a defoamer detergent to clean water for correct cleaning. Make sure that the auxiliary chemical recommended for use in the CLEANVAC B12001 floor cleaning machine with rider is designed for use only in floor cleaning machines. The use of heavy chemicals, such as excessive foaming or damage to plastic parts, may cause malfunction of your machine. In addition to all these, it is sufficient to use only surface cleaner.

With the advanced drive control panel, CLEANVAC B12001 can manage many settings from a single point. Contact and non-contact progress can be achieved from the rubber scraping apparatus to two 42 cm diameter brushes that brush the floor. All that needs to be done is to touch the relevant buttons and buttons on the driver control panel. Due to its domestic production, it has a widespread service network. In this way, you can easily maintain your machine. It guarantees that spare parts that you may need in case of malfunction of your machine will be kept by our factory for 10 years and that your machine will have spare parts for the life of the machine determined by the joint decision of our country's mechanical engineers.